Kenwood TK-7180/8180 VHF/UHF FM Mobile Radios
6 Programmable Function Keys
Emergency Features
Operation-Sevection Tone (Conventinal)
Encryption & ANI Module Control
DB-25 Accessory Connector (Female)
Remote Control I/O’S
Mobile Data I/O Ports
Programmable AUX I/O’S
Real-Time Clock for Time Stamping
Embedded Message
Radio Lock Password
Timed Power Off (8-Hour)
Ignition Sense Input & Cable Option
Horn Alert & Public Address Option
Flash Memory
Windows PC Programming & Tuning
Clonning
MPT1327 Compatible
-
12-CHARACTER DOT-MATRIX DISPLAY WITH ICONS
The backlighting and high-resolution dot matrix 12-character alphanumeric display provides easy-to-read channel aliases day or night. Also a 3-digit sub-display forzone/channel/group ID numbers and icons for function/status indicators make for intuitive operation.
-
512 CHANNELS / 128 ZONES
- The large 512 channel / 128 zone capability* accommodates virtually any current or future capacity requirement for single or multiple site radio systems.
- Maximum capacity notes*
- 128 Conventional & LTR Zones cumulative maximum per radio
- 512 Conventional Channels & Group ID’s (GID’s) cumulative maximum per radio
- 250 Channels maximum per any Conventional Zone
- 250 GID’s maximum per any LTR Zone
-
CONVENTIONAL & LTR TRUNKING ZONES
The TK-7180/8180 operates on LTR ? trunking systems, conventional channels or any combination of both, facilitating mixed operation today or migration tomorrow.
-
DUAL PRIORITY & SCAN FEATURES
Dual-Priority Scan automatically checks two important channels for activity while channel scanning (conventional zones only). Also, each radio can be programmed to scan any organization of channels, systems and talk groups using the many programmable scan features and parameters. Channel/ GID Delete/Add, Nuisance Delete and Priority Temporary Delete provide relief from non-essential voice traffic when scanning multiple channels or trunked talk groups.
-
EASY OPTION PORT
KENWOOD’s plug-in option port makes the VGS-1 option and compatible after-market board installation a quick and simple.
-
ENAHNCED KENWOOD AUDIO
KENWOOD utilizes its long standing audio heritage to optimize voice frequency components so that the audio output cuts through typical ambient noise. This enhancement and the companded noise reduction provide clarity and low distortion especially on narrow bandwidth systems.
-
FLEETSYNC / FLEETSYNC II
KENWOOD’s FleetSync® digital signaling system includes PTT ID digital ANI for instant radio call identification and Emergency status for personnel safety. FleetSync also includes status messaging, selective calling and short/long text dispatch messaging features. The TK-7180/8180 supports either original FleetSync® or FleetSync®II*.
*FleetSync and FleetSync II are incompatible. -
FLEETSYNC GPS READY
The TK-7180/8180 has connection ports (internal or external) for GPS receiver units with a standard NMEA-0183 data output. This enables a FleetSync-compatible AVL system to track a fleet of TK-7180/8180 mobiles.
-
MOBILE ELEGANCE
KENWOOD employed premium industrial design concepts to make the TK-7180/8180 mobiles functionally practical, rugged and attractive whether vehicle or station installed.
-
REMOTE CONTROL HEAD OPTION
The KRK-10 remote kit converts the front panel into a space saving remote control head for today’s smaller vehicles and console mounting.
-
ROBUST & RELIABLE
The TK-7180/8180 is built to survive the hard knocks and harsh all weather environments of many type mobile installations. These mobiles meet or exceed the stringent the MIL-STD 810 C, D, E & F environmental standards including the demanding “driven rain” test.
-
SIGNALING
-
The TK-7180/8180 includes industry standard signaling formats for the most common type radio systems.
-
QT/DQT:
Sub-audible QT tones and DQT digital codes provide industry standard talk group muting and segregation for conventional radio systems. -
DTMF:
DTMF permits DTMF PTT ID, telephone interconnect operation, individual/group selective calling and remote radio disable/enable (remote stun). -
2-Tone Selective Calling:
Four code pairs each with individual and group page settings and audio visual alerts can be assigned per channel.
-
-
VGS-1 VOICE GUIDE & STORAGE UNIT
This innovative KENWOOD option makes several functions possible. “Voice Guide” announces zone, channel, groups and feature activation/deactivation in a clear synthesized voice.A great tool for radio communications training or as an aid for the sight or physically impaired. “Voice Storage” records up to 300 seconds of receive audio for missed calls or your own voice for memo recording. It also can transmit an “Auto-Reply” greeting and record voice messages for unattended radios while away from the radio or while in a meeting (the calling unit must send a FleetSync ? selective call for activation). The VGS-1 can be used to store FleetSync® GPS AVL data*. * Voice functions are not available when the VGS-1 is used for FleetSync GPS data storage.
-
VOICE INVERSION SCRAMBLER
The built-in voice inversion scrambler provides basic protection against casual eavesdropping.
-
WIDE BAND OPERATION
The TK-7180/8180 models feature wide band UHF (70 MHz) and VHF (38 MHz) coverage in one radio model.
TK-7180 | TK-8180 | |||
---|---|---|---|---|
GENERAL | ||||
Frequency Range Type 1 | 136~174 MHz | 450~520 MHz | ||
Frequency Range Type 2 | – | 400~470 MHz | ||
Number of Channels* Zone Ch/GID |
Max.128 per Radio Max.250 per Zones (Max.512 [Conv.Ch’s +GID’s] total per Radio) |
|||
Channel Spacing Wide Narrow |
25 kHz, 30 kHz 12.5 kHz, 15 kHz |
25 kHz 12.5 kHz |
||
Operating Voltage | 13.6 V DC±15 % | |||
Current Drain Standby Receive Transmit |
0.4 A 1.0 A 9.0 A |
0.4 A 1.0 A 9.0 A |
||
Duty Cycle | Transmit: 20 % | |||
Operating Temperature Range | -22 ºF ~ +140 ºF (-30 ºC ~ +60 ºC) | |||
Frequency Stability | ±0.00025 % (-22 ºF ~ +140 ºF) | |||
Antenna Impedance | 50 Ω | |||
Channel Frequency Spread Type 1 Type 2 |
38 MHz – |
70 MHz 70 MHz |
||
Dimensions (W x H x D), Projections not included |
6-5/16” x 1-3/4” x 6-3/16” (160 mm x 45 mm x 157 mm) |
|||
Weight (net) | 3.3 lbs. (1.5 kg) | |||
FCC ID Type 1 Type 2 |
K4437303110 – |
K4437313110 K4437313120 |
||
IC Certification Type 1 Type 2 |
282F-37303110 – |
– 282F-37313120 |
||
RECEIVER (Measurements made per EIA/TIA-603) | ||||
Sensitivity (12dB SINAD) Wide Narrow |
0.25 μV 0.28 μV |
|||
Selectivity** Wide Narrow |
80 dB 70 dB |
80 dB 67 dB |
||
Intermodulation Distortion Wide/Narrow |
75 dB (±50, 100 kHz) |
|||
Spurious Response** | 90 dB | 85 dB | ||
Audio Output (4 Ω Impedance) |
4 W with less than 5 % distortion |
|||
TRANSMITTER (Measurements made per EIA/TIA-603) | ||||
RF Output Power Type 1 br />Type 2 |
30 to 1 W – |
30 to 1 W (490 -520 MHz:25 to 1 W) 30 to 1 W |
||
Spurious Response | 70 dB | |||
Type of Emission Wide Narrow |
16K0F3E 11K0F3E |
|||
FM Hum & Noise Wide Narrow |
50 dB 45 dB |
|||
Microphone Impedance | 600 Ω | |||
Audio Distortion Wide/Narrow |
3% |
*Maximum capability depends on the number of programmed Zone and repeater channels.
** Typical specifications Specifications are subject to change without notice, due to advancements in technology.
FleetSync® is a registered trademark of JVCKENWOOD Corporation.
LTR® is a registered trademark of Transcrypt International.
All other trademarks are property of their respective owners.
Applicable MIL-STD & IP
Standard | MIL 810C Methods/Procedures |
MIL 810D Methods/Procedures |
MIL 810E Methods/Procedures |
MIL 810F Methods/Procedures |
---|---|---|---|---|
Low Pressure | 500.1/Procedure I | 500.2/Procedure I, II | 500.3/Procedure I, II | 500.4/Procedure I, II |
High Temperature | 501.1/Procedure I, II | 501.2/Procedure I, II | 501.3/Procedure I, II | 501.4/Procedure I, II |
Low Temperature | 502.1/Procedure I | 502.2/Procedure I, II | 502.3/Procedure I, II | 502.4/Procedure I, II |
Temperature Shock | 503.1/Procedure I | 503.2/Procedure I | 503.3/Procedure I | 503.4/Procedure I, II |
Solar Radiation | 505.1/Procedure I | 505.2/Procedure I | 505.3/Procedure I | 505.4/Procedure I |
Rain | 506.1/Procedure I, II | 506.2/Procedure I, II | 506.3/Procedure I, II | 506.4/Procedure I, III |
Humidity | 507.1/Procedure I, II | 507.2/Procedure II, III | 507.3/Procedure II, III | 507.4 |
Salt Fog | 509.1/Procedure I | 509.2/Procedure I | 509.3/Procedure I | 509.4 |
Dust | 510.1/Procedure I | 510.2/Procedure I | 510.3/Procedure I | 510.4/Procedure I, III |
Vibration | 514.2/Procedure VIII, X | 514.3/Procedure I | 514.4/Procedure I | 514.5/Procedure I |
Shock | 516.2/Procedure I, II,III,V | 516.3/Procedure I, IV,V | 516.4/Procedure I, IV,V | 516.5/Procedure I, IV,V |
International Protection Standard | ||||
Dust & Water Protection | P54: Radio itself P54/55: Remote Head with KRK-10 |
*To meet above Mil810 and IP grade, weather proof microphone KMC-35 or KMC-36 has to be connected.
- Adapter Cables
- Audio Accessories
- Cables
- Charger Accessories
- Installation and Mounting
- Mobile Microphones
- Remote Speaker Microphones
- Speakers and Amplifiers
- Two-way Radio Accessories
-
KAP-2
KAP-2 HORN ALERT/P.A. RELAY UNIT -
KCT-23M
KCT-23M DC Cable (Dash mount / 10 feet) -
KCT-23M3
KCT-23M3 DC Cable (Dash mount / 23 feet) -
KCT-40
KCT-40 Radio Interface Cable (for KDS-100, KGP-2A/2B) -
KCT-46
KCT-46 IGNITION SENSE CABLE -
KDS-100
KDS-100 Mobile Data Terminal -
KES-3
KES-3 EXTERNAL SPEAKER (compact low profile;3.5 mm plug) -
KES-5
KES-5 EXTERNAL SPEAKER (40 W max input,requires KAP-2) -
KGP-2A-2B
KGP-2A/2B GPS Receiver / Modem Unit -
KLF-2
KLF-2 LINE FILTER -
KMB-10
KMB-10 KEY LOCK ADAPTER -
KMC-30
KMC-30 Microphone -
KMC-32
KMC-32 16-key Keypad Microphone -
KMC-35
KMC-35 MICROPHONE -
KMC-36
KMC-36 KEYPAD MICROPHONE -
KMC-9C
KMC-9C Desktop Microphone -
KPS-10A
KPS-10A DC Power Supply -
KPS-15
KPS-15 DC POWER SUPPLY -
KRK-10
KRK-10 Control Head Remote Kit (23ft/7m) -
VGS-1
VGS-1 Voice Guide & Storage Unit