• Kenwood NX-420K3 NEXEDGE

    Kenwood NX-420K3 NEXEDGE

    NEXEDGE® 800MHz Digital & Analog Portable Radio

    806 – 870 MHz (1W/3W)
    260 CH-GID / 128 Zones (LCD Model)
    64 CH-GID / 4 Zones (Non LCD Model)
    12-Key Keypad Model
    8 Character Alphanumeric Aliases
    Function / Status LCD Icons
    Transmit / Busy / Call Alert / Warn LED
    On / Off Volume Knob
    16-Position Selector
    4 Front PF Keys
    2 Side PF Keys
    Emergency / AUX Key
    Built-in Motion Sensor
    500 mW Speaker Audio
    Zone / CH Number Voice Announcement
    KMC-48GPS Speaker Mic Option
    KPG-141D Windows® FPU
    Flash Firmware Upgrading
    MIL-STD-810 C/D/E/F/G
    IP54/55 Dust & Water Intrusion
    PC Serial Interface
    SDM Manual Input*1
    Transparent Data Mode*1

    • Digital-Conventional Mode

      64 Radio Access Numbers (RAN)
      Individual & Group Selective Call*3
      Mixed FM / Digital Operation
      Conventional IP Networks
      Site Roaming

    • Digital-Trunking Mode

      Individual Private Call
      Group Call & Broadcast Call
      Telephone Interconnect
      Transmission Trunked Mode*4
      Message Trunked Mode*4
      Call Queuing with Priority*4
      Late Entry (UID & GID)*4
      4 Priority Monitor ID’s*4
      Remote Re-Grouping*1
      Failsoft Mode

    • FleetSynce/ II (FM)

      PTT ID ANI / Caller ID*3
      Selective /Group Call*3
      Emergency, Status & Text Messages*1

    • FM Modes-General

      25 & 12.5 kHz Channels
      NPSPAC Channels
      Conventional & LTR® Zones
      FleetSync® / II, MDC-1200, DTMF*3
      QT / DQT (Conventional Zones only)*3
      Voice Inversion Scrambler (16 Codes)

    • General Features

      NXDN Conventional / Trunk
       ・Conventional
       ・Conventional IP Network
       ・NEXEDGE Type-C Network
       ・NEXEDGE Type-C Gen2 Network
      Mixed Mode Operation – Digital / Analog FM
      Power Output – 25 W / 0.5 Watts (100% Duty)
      IP LAN/WAN Connectivity
      Ethernet Network Interface
      SNMP Protocol Ready
      Frame Error Rate (FER) / RSSI Output
      Built-In 0.5 ppm TCXO

      30 Channels
      70 MHz UHF Coverage
      6.25 & 12.5 kHz Bandwidth
      Two-Digit Numeric Display
      LED Status Indicators
      USB 2.0 Type-B Interface
      UID & GID Validation
      NXR Over-the-Air Alias
      6-Programmable Function Keys
      0.3 W Front Panel Speaker / 3-W External Speaker Audio
      Remote Termination Interface
      Programmable AUX I/O’s
      DTMF Remote Control
      Remote System Firmware Updates
      Program / Modem Interface
      Digital Voting
      RF Link
      Digital Simulcast

    • General Features

      – 30/50 W (136-174 MHz) Model
      – 30/45 W (400/470, 450-520 MHz) Models
      – 512-CH-GID / 128 Zones
      – 14 Character Alphanumeric Aliases
      – Dash & Remote Mount
      – Programmable Function Keys
      – Dual Priority Scan
      – Emergengy/AUX Keys
      – Enhanced KENWOOD Audio
      – DB-25 Accessory Connector
      – Cloning
      – Voice inversion scrambler
      – Front Panel Test & Tune
      – Easy Option Port
      – MIL-STD 810 C/D/E/F
      – MIL-STD “Driven-Rain”
      – FM Conventional & LTR Included
      – NXDN Conventional Included
      – Trunking Options Available
      – FleetSync®/II digital signaling system includes PTT ID digital ANI (FM)
      – Multi-Site IP Network Compatible
      – MPT Option

    • MDC-1200

      PTT ID ANI / Caller ID*3
      Emergency, Radio Check & Inhibit

      *1 Requires compatible software application (e.g. KAS-10) or console hardware.

      *2 Non LCD Model -Pre-programmed key operation

      *3 Non LCD Model -Some screen / key-based functions are not available.

      *4 These trunked features are primarily system programming and operational dependent. Priority Monitor also requires NX subscriber settings.

    • Multi-Site IP Network Compatible

      60,000 GIDs / UIDs
      Wide Area Group Call
      Auto Roaming Registration
      Group Registration

    • SCAN

      Single Zone / Multi-Zone / List Scan
      Single Priority Scan (Conventional)

    Request a Quote

    Ready to talk?

    Let’s work together to develop the right communications solution for your business.